Thursday, September 26, 2013

Main Parts of Camera Film

Main Parts of Camera Film

The makeup of film may be more complicated than a camera while a film camera merely allows a controlled light leak to reach the film's surface. Although just a fraction of a millimeter thick, camera film consists of many layers of chemical coatings. Aside from being light-sensitive, film is designed to resist scratches and unwanted printing effects.

Topcoat Layer

    The topcoat of film is the glossy layer facing you as you view the images in their correct orientation. This protective coating prevents scratches that can occur during the handling of film in carriers or inadequate storage.

Emulsion Layer

    Below the topcoat lies the emulsion layer. This layer consists of about 60 percent silver-halide crystals that darken when exposed to light. The remaining 40 percent consists of gelatin. If the film is color, dye couplers will also be present. The dyes are layered with magenta on top, cyan in the middle and yellow below. These layers are sensitive to green, red and blue light respectively. When color film is processed, the light-sensitive silver compound is washed out and only dyes remain.

First Adhesive

    Below the emulsion is a thinner layer of adhesive. Its purpose is to connect the emulsion and the film base.

Base Layer

    The base layer is made of flexible and transparent plastic. The thicknesses of various film formats and brands can vary according to the contents of this level. The base provides support for the emulsion, which would be too thin and fragile on its own.

    Early film bases were made from cellulose nitrate, which is flammable and caused catastrophic results with motion picture films. More modern film bases are made from cellulose acetate or polyester.

Second Adhesive

    Another adhesive layer bonds the base to the final bottom layer, called the antihalation coating.

Antihalation Layer

    When a negative is exposed in a camera, care is taken to make sure the emulsion layer only receives one exposure to light. The antihalation layer is in place to keep light from reflecting off the bottom layer and reflecting back through the emulsion. This reaction would cause undesirable halos to appear in the brightest parts of the image or create secondary images. The dye is designed to have no effect on image quality.

Antistatic Layer

    Some films will have an antistatic layer on the backside of the base. It prevents static sparks from being generated while the film is advanced in a camera. Such static sparks would create areas of exposure on the film.


Main Parts of Camera Film

The makeup of film may be more complicated than a camera while a film camera merely allows a controlled light leak to reach the film's surface. Although just a fraction of a millimeter thick, camera film consists of many layers of chemical coatings. Aside from being light-sensitive, film is designed to resist scratches and unwanted printing effects.

Topcoat Layer

    The topcoat of film is the glossy layer facing you as you view the images in their correct orientation. This protective coating prevents scratches that can occur during the handling of film in carriers or inadequate storage.

Emulsion Layer

    Below the topcoat lies the emulsion layer. This layer consists of about 60 percent silver-halide crystals that darken when exposed to light. The remaining 40 percent consists of gelatin. If the film is color, dye couplers will also be present. The dyes are layered with magenta on top, cyan in the middle and yellow below. These layers are sensitive to green, red and blue light respectively. When color film is processed, the light-sensitive silver compound is washed out and only dyes remain.

First Adhesive

    Below the emulsion is a thinner layer of adhesive. Its purpose is to connect the emulsion and the film base.

Base Layer

    The base layer is made of flexible and transparent plastic. The thicknesses of various film formats and brands can vary according to the contents of this level. The base provides support for the emulsion, which would be too thin and fragile on its own.

    Early film bases were made from cellulose nitrate, which is flammable and caused catastrophic results with motion picture films. More modern film bases are made from cellulose acetate or polyester.

Second Adhesive

    Another adhesive layer bonds the base to the final bottom layer, called the antihalation coating.

Antihalation Layer

    When a negative is exposed in a camera, care is taken to make sure the emulsion layer only receives one exposure to light.

    Enhance your photography skill,The Top Secret Photography Techniques

    . The antihalation layer is in place to keep light from reflecting off the bottom layer and reflecting back through the emulsion. This reaction would cause undesirable halos to appear in the brightest parts of the image or create secondary images. The dye is designed to have no effect on image quality.

Antistatic Layer

    Some films will have an antistatic layer on the backside of the base. It prevents static sparks from being generated while the film is advanced in a camera. Such static sparks would create areas of exposure on the film.



  • NASA's Alien Anomalies caught on film - A compilation of stunning ...

    www.youtube.com/watch?v=WlLN_Jcg1pc

    This compilation includes many of my favorite NASA UFO encounters/sightings that I have archived over the years. All of these examples (with the exception ...


  • Expert photography blogs, tips, techniques, camera reviews ...

    www.adorama.com/alc

    Adorama Learning Center How-to tips, buying guides, tutorials from AdoramaTV, product reviews for better photography, video, and more!


  • Che: Part Two (2008) - IMDb

    www.imdb.com/title/tt0374569

    In 1965, Ernesto 'Che' Guevara resigns from his Cuban government posts to secretly make his latest attempt to spread the revolution in Bolivia. After arriving in La ...


  • CAMERA: Committee for Accuracy in Middle East Reporting in

    www.camera.org

    Group devoted to monitoring and challenging perceived anti-Israeli news coverage. Statement of purpose, reports, criticism, outreach, press releases, links and ...


  • Star Wars: The Phantom Menace Review (Part 1 of 7) - YouTube

    www.youtube.com/watch?v=FxKtZmQgxrI

    http://www.redlettermedia.com - Finally it's here! The truly epic review/critique/analysis/film making educational video of the 1999 film "Star Wars:


  • Appliance Parts & Consumer Electronic Parts PartSelect

    www.partselect.com

    Save when you repair your appliance with PartSelect appliance parts. Same-day shipping, return any part, 100s of installation videos, installation help and the ...


  • Roberts Camera: Everything Photo, Everything Imaging

    robertscamera.com

    Roberts is a nationally known source for professional and hobbyist photo gear. Major brands like Canon, Nikon, Leica, Panasonic, Olympus, Sony, & more.


  • Telos - Cult TV & Film: Main

    www.telos.me.uk/category.php?id=2

    Cult TV & Film New Books - New Worlds. Telos Publishing's range of Cult TV and film titles is one of the most varied and exciting around. We have books on popular TV ...

0 comments:

Post a Comment