Wednesday, January 28, 2015

How to Fix Photos With a Channel Mixer

A channel mixer is a tool found only in photography editing software. It is an application that allows you to virtually separate the three or four channels of a photo, and change them on a percentage scale. The use of channels changes the saturation of color depending on the channel mode. The channel mixer is primarily used for converting photos to black and white, as it allows the operator to maintain or enhance absent levels of contrast and detail. It also enhances color outputs in colored photographs the same way a colored lens filter would when attached to the lens of a camera.

Instructions

    1

    Understand RGB and CMYK. At any time you can alter the mode at which your photo software processes your image. These modes include grayscale (black and white) and the color modes RGB and CMYK. RGB stands for red, green and blue, while CMYK stands for cyan, magenta, yellow and black. You can change the mode in Photoshop by clicking the "Image" bar on the top drop-down menu, and selecting "Mode." The differences between RGB and CMYK when using a channel mixer are the colors that are being manipulated. RGB is more commonly used than CMYK when adjusting color components of a photograph.

    2

    In Photoshop, there are many ways in which to convert an image to black and white, and they will all produce variant results. To use the channel mixer to turn an image to black and white, first access the channel mixer screen. In the drop-down tool bar select "Image" followed by "Adjustments" followed by "Channel Mixer." A small tool pallet will appear on your screen. Before adjusting the RGB (note: you cannot use CMYK color mode to alter a photo to black and white using the channel mixer) levels, check-mark the small box at the bottom of the pallet labeled "Monochrome." This will turn the photo black and white, after which you can adjust individually the reds, greens or blues to increase or decrease the white and black contrast through the original colors (though you will only see black and white). There is no set percentage to adjust your image to, as it completely depends on the quality and original contrast of your photo. Nothing will happen to your photo until you press "OK," so take some time to experiment decreasing and increasing each percentage until the photo looks how you wish it to look.

    3

    Adjusting colors. Channel mixing for color adjustment works the same way as channel mixing for colors (without going to black-and-white mode). The only difference is that you will not select the "Monochrome" feature at the bottom of the pallet. The channel mixing in color mode is less common than in monochromatic, as very slight increases in percentage are needed. Channel mixing in color mode tends to alter the realistic color balance of a photo. However, if the effect you are attempting requires the complete alteration into unnatural colors, then adjust to any degree you prefer. This can be done in either RGB or CMYK mode.

    4

    Making corrections. Along with properly controlled desaturation (turning a photo black and white) and color alteration, channel mixing can accomplish specific corrections on a photo. If you are dealing with a portrait in which the model has less than perfect skin, altering the red channel will lessen if not completely diminish the appearance of skin imperfections. The blue channel will usually sharpen facial features and highlight characteristics.


A channel mixer is a tool found only in photography editing software. It is an application that allows you to virtually separate the three or four channels of a photo, and change them on a percentage scale. The use of channels changes the saturation of color depending on the channel mode. The channel mixer is primarily used for converting photos to black and white, as it allows the operator to maintain or enhance absent levels of contrast and detail. It also enhances color outputs in colored photographs the same way a colored lens filter would when attached to the lens of a camera.

Instructions

    1

    Understand RGB and CMYK. At any time you can alter the mode at which your photo software processes your image. These modes include grayscale (black and white) and the color modes RGB and CMYK. RGB stands for red, green and blue, while CMYK stands for cyan, magenta, yellow and black. You can change the mode in Photoshop by clicking the "Image" bar on the top drop-down menu, and selecting "Mode." The differences between RGB and CMYK when using a channel mixer are the colors that are being manipulated. RGB is more commonly used than CMYK when adjusting color components of a photograph.

    2

    In Photoshop, there are many ways in which to convert an image to black and white, and they will all produce variant results. To use the channel mixer to turn an image to black and white, first access the channel mixer screen. In the drop-down tool bar select "Image" followed by "Adjustments" followed by "Channel Mixer." A small tool pallet will appear on your screen. Before adjusting the RGB (note: you cannot use CMYK color mode to alter a photo to black and white using the channel mixer) levels, check-mark the small box at the bottom of the pallet labeled "Monochrome." This will turn the photo black and white, after which you can adjust individually the reds, greens or blues to increase or decrease the white and black contrast through the original colors (though you will only see black and white). There is no set percentage to adjust your image to, as it completely depends on the quality and original contrast of your photo. Nothing will happen to your photo until you press "OK," so take some time to experiment decreasing and increasing each percentage until the photo looks how you wish it to look.

    3

    Adjusting colors. Channel mixing for color adjustment works the same way as channel mixing for colors (without going to black-and-white mode). The only difference is that you will not select the "Monochrome" feature at the bottom of the pallet. The channel mixing in color mode is less common than in monochromatic, as very slight increases in percentage are needed. Channel mixing in color mode tends to alter the realistic color balance of a photo. However, if the effect you are attempting requires the complete alteration into unnatural colors, then adjust to any degree you prefer. This can be done in either RGB or CMYK mode.

    4

    Making corrections. Along with properly controlled desaturation (turning a photo black and white) and color alteration, channel mixing can accomplish specific corrections on a photo. If you are dealing with a portrait in which the model has less than perfect skin, altering the red channel will lessen if not completely diminish the appearance of skin imperfections.

    Enhance your photography skill,The Top Secret Photography Techniques

    . The blue channel will usually sharpen facial features and highlight characteristics.



  • How to Repair Fiberglass - YouTube

    www.youtube.com/watch?v=SsoKAHU5xUw

    http://www.tapplastics.com/ This video segment will show you how to do a simple fiberglass repair. This demonstration is applicable to any fiberglass ...


  • How to Fix your car dent with a hair dryer Auto Maintenance ...

    diy-auto-repair.wonderhowto.com/how-to/fix-your-car-dent-with-hair...

    How to Fix your car dent with a hair dryer; How to Diagnose and replace a blown head gasket; How to Unlock a car door using a cell phone and a faraway keyless remote ...


  • Auto Glass Repair - How To Information Page 1 eHow

    www.ehow.com Cars Auto Repair

    Don't just sit there scratching your head, find useful info on Auto Glass Repair on eHow. Get essential tips and learn more about everything from How do I Remove a ...


  • Auto Repair & Mechanics : How to Test a Car Relay - YouTube

    www.youtube.com/watch?v=3JB63ebFfgU

    Testing a car relay involves the use of a 12-volt source, such as a car battery, and a multimeter that is capable of reading resistance. Find out how to ...


  • How To Fix A Squeaky Dryer - The Parker House

    www.parker-house.net/articles/DryerRepair/DryerFix.php

    Warning: mysql_connect() [function.mysql-connect]: Access denied for user 'users_pictures'@'72.167.131.52' (using password: YES) in


  • How to Look Good Naked - Channel 4

    www.channel4.com/programmes/how-to-look-good-naked

    The Internet home of How to Look Good Naked at Channel 4; includes How to Look Good Naked Series and Episode Guides, Videos, Catch Up, Pictures and News &


  • Home Improvement - Home Repair Projects and How-To Video

    www.hgtv.com HGTV Home Improvement

    Need help with your home improvement project? HGTV experts demonstrate basic home repairs and how-to projects.


  • Building Materials & Supplies - How To Information Page 1 eHow

    www.ehow.com Home & Garden Building & Remodeling

    Don't just sit there scratching your head, find useful info on Building Materials & Supplies on eHow. Get essential tips and learn more about everything from How to ...


  • How to Fix the driver side window in a Dodge Dakota truck Auto ...

    diy-auto-repair.wonderhowto.com/how-to/fix-driver-side-window...

    This automotive repair tutorial shows you how to fix a broken power window on a 1998 Dodge Dakota Sport 4x4 when it won't go up or down. Even if you don't know ...

0 comments:

Post a Comment