Thursday, November 16, 2017

DIY Light Reflector

DIY Light Reflector

Light reflectors are commonly used in film and photography to add light to an object without the glare of direct lighting. To use your light reflector, have someone hold it (or place it on a stand) off to the side of the object you are photographing. Aim the light at the reflector rather than the object, then adjust the position of the light and the reflector until the object is lit the way you want it. You may need multiple lights and reflectors to provide even lighting on all sides, or you can combine reflected light with direct lighting to fill in dark spots without overwhelming your primary light source, a technique known as fill lighting.

Instructions

    1

    Lay out a piece of white foam core board, with the shiny side down if it has one. Tear off enough pieces of aluminum foil to fully cover one side of the board.

    2

    Crumple the foil gently, then straighten it out so it has loose crinkles. Tape it to the board around all four edges with the shiny side facing out. This is your reflector side of the board. If you need a softer light, use the shiny white side of the board to redirect light at your object--this is known as a bounce card.

    3

    Set up the base of an adjustable musician's stand and discard the top part. Clip your reflector to the stand with a spring-loaded clip and adjust the stand height as necessary.

    4

    Create another reflector using the dull side of the aluminum foil if you want an option that offers reflective qualities but diminishes the harshness of the shiny reflector.


DIY Light Reflector

Light reflectors are commonly used in film and photography to add light to an object without the glare of direct lighting.

Enhance your photography skill,The Top Secret Photography Techniques

. To use your light reflector, have someone hold it (or place it on a stand) off to the side of the object you are photographing. Aim the light at the reflector rather than the object, then adjust the position of the light and the reflector until the object is lit the way you want it. You may need multiple lights and reflectors to provide even lighting on all sides, or you can combine reflected light with direct lighting to fill in dark spots without overwhelming your primary light source, a technique known as fill lighting.

Instructions

    1

    Lay out a piece of white foam core board, with the shiny side down if it has one. Tear off enough pieces of aluminum foil to fully cover one side of the board.

    2

    Crumple the foil gently, then straighten it out so it has loose crinkles. Tape it to the board around all four edges with the shiny side facing out. This is your reflector side of the board. If you need a softer light, use the shiny white side of the board to redirect light at your object--this is known as a bounce card.

    3

    Set up the base of an adjustable musician's stand and discard the top part. Clip your reflector to the stand with a spring-loaded clip and adjust the stand height as necessary.

    4

    Create another reflector using the dull side of the aluminum foil if you want an option that offers reflective qualities but diminishes the harshness of the shiny reflector.



  • 101 DIY Lighting Tutorials FilmmakerIQ.com

    filmmakeriq.com/2009/10/101-diy-lighting-tutorials

    Good lighting is one of the most important aspects of any professional production. Unfortunately your budget may not allow for all the expensive equipment required ...


  • DIY Aquarium Canopy, Hood and Light Plans

    saltaquarium.about.com Do-It-Yourself

    From standard NO, HO and VHO fluorescent bulbs, to advanced PC, MH and other kinds of tank lighting, here is a collection of diy aquarium hood plans for making light ...


  • F30 328i/335i front bumper REFLECTORS removal / install DIY -

    www.f30post.com/forums/showthread.php?t=730082Last updated: Aug 13, 2012 22 posts First post: Aug 11, 2012

    Technical Forums > F30 DIYs and Coding Discussions ... Featured on BIMMERPOST.com Hey Guys, Heres a quick guide to removing and replacing ... That


  • DIY: How to Remove Foglight Housing and Bulb Reflector -

    www.rx8club.com/...73/diy-how...foglight-housing-bulb-reflector-176299

    This is a DIY for how to remove the foglight housing and the bulb reflector. I wanted to remove the bulb reflector inside the foglight housing because


  • DIY Photography Reflectors The Wannabe Chef

    www.thewannabechef.net/2013/05/06/diy-photography-reflectors

    Photography is expensive. Anyone who has picked up photography as a hobby or who does it professionally will tell you that. And my wallet has definitely felt that ...


  • DIY Light Scoop Template - Instructables - Make, How To, and DIY

    www.instructables.com/id/DIY-Light-Scoop-Template

    Light scoops work wonders for indoor flash photography by shifting your camera's built in flash from direct to indirect lighting. The reflector mirro...


  • Flexible Reflector - use to increase the lighting on your DIY ...

    www.youtube.com/watch?v=3453bswfiz0

    Sheet is super flexible, 6 X 9" (15 X 22.5 cm), and is a perfect reflector... much more than aluminum or mirrors. Available at www.Santa-Monica.cc


  • Outdoor DIY Lighting Kits - Affordable Quality Lighting

    www.affordablequalitylighting.com/outdoor-diy-lighting-kits

    Need an flexible outdoor light solution? Our outdoor DIY kits give you the versatility to fulfill any outdoor lighting project, no matter how creative you are.


  • Photography Lighting : DIY Photography Lighting - YouTube

    www.youtube.com/watch?v=9YbSekYcX2k

    Do-it-yourself photography lighting can involve using basic clamp lights from the hardware store and boards covered in tinfoil as reflectors. Find everyday ...


  • DIY Reflector for Natural Light Photography.

    www.digital-photography-school.com/diy-ref

    I la la lava me a nice white photo reflector. Catch me out on shoot or at a wedding and chances are, 9 times out of an even 10, Ill have my trusty ol reflector ...


  • DIY: Open Headlights - Taillights. - RX8Club.com

    www.rx8club.com/...ii-diy-161/diy-open-headlights-taillights-213651

    Welcome Ladies and Gentlemen to yet another DIY. This time, it's going to be cracking open your headlights and putting them back together. Are you


  • Lights DIY - Do It Yourself - Mtbr Forums

    forums.mtbr.com/lights-diy-do-yourself

    Lights DIY - Do It Yourself - Sponsored by Dinotte Lighting & JetLites & Lupine & MagicShine & Gloworm Lites & Xeccon Lights &

  • Feit Electric 300-Watt R40 Pool and Spa Reflector Incandescent ...

    www.homedepot.com/p/Feit-Electric-300-Watt-R40-Pool-and-Spa...$298.00 In stock

    Get the Feit Electric 300-Watt R40 Pool and Spa Reflector Light Bulbs (24-Pack) (E)* 300R/FL/24-12, white specifically built for use in pools and spas at The Home ...

  • LED DIY kits - Affordable Quality Lighting

    www.affordablequalitylighting.com/led-diy-kits

    Need more than one light to get the job done? Our LED DIY kits have everything you need to complete the task at hand.

  • Putting Together a Budget DIY Lighting System Shuttertalk

    www.shuttertalk.com/2006/03/putting-together-a-budget-diy-lighting...

    A lighting system in photography seems to be a fairly expensive area to get into. Thankfully, this article will show you how to put together a flexible and robust ...

  • Incandescent Reflector Light Bulbs 1000Bulbs.com

    www.1000bulbs.com/category/flood-light-bulbs

    Heat Reflector Bulbs, Plant Bulbs, Incandescent Bulbs, Weatherproof Bulbs, get them all shipped today direct to you from 1000Bulbs.com

  • DIY Lighting Hacks for Digital Photographers

    digital-photography-school.com/diy-flash-and-lighting-hacks-for-dig

    Lighting can be the difference between a good shot and a great one. Walk into most professional photographers studios and youll be confronted with truckloads of ...

  • The "Do It Yourself" LED Bike Light Guide

    bikeled.org

    Welcome to my web site dedicated to providing info on building your very own DIY LED bike light. Each year the technology just gets better, but the basics are the ...

  • DIY Cree Eave Lighting

    www.candlepowerforums.com/vb/...326815-DIY-Cree-Eave-Lighting

    To follow with the current trend in the fixed Lighting section I lit up my eaves with ... On one of the backsides of my house is a peak. I mounted 2 lights about 16 ...

  • DIY Parts - Hellolights.com - Your Aquarium Lighting Superstore

    www.hellolights.com/diyparts.aspx

    DIY Parts at Hellolights - High Quality Service and Fast shipping for all your aquarium lighting needs.

  • NEW 2 PCS CAR DIY 21 LED DRL Driving Daytime Running Light

    www.ebay.com.au/...DIY-21...Light-Bar-SMD5630-12V-FV88-/130842116331

    New 2 PCS Car DIY 21 LED DRL Driving Daytime Running Light Bar SMD5630 12V FV88 in Vehicle Parts & Accessories, Car, Truck Parts, Lights, Indicators eBay

0 comments:

Post a Comment