Thursday, December 20, 2018

How to Remove an Ambrotype From a Case Without Damaging It

Often compared to daguerreotypes, ambrotypes are antique photographs made by under-exposing a glass plate coated in emulsion, bleaching it and placing a black background behind it. While these images look something like daguerreotypes, the process of creating an ambrotype is very different. The images were popular alternatives to the expensive and painful daguerrotype process because they were easier to produce, required less exposure time (and therefore less pain for the subject) and cost much less than their metallic cousins. If you have an ambrotype, it is most likely in a case that doubles as a frame. This case protects the ambrotype and allows it to be viewed against a black background, but it can be removed very carefully.

Instructions

    1

    Open the ambrotype case and lay it out on a flat surface like a countertop or table. Take care to use a clean surface.

    2

    Use a knife or small chisel to pry the ambrotype and its brass casing from the wooden case. If you find the ambrotype does not separate from the case easily, go no further. The ambrotype is likely cemented to the case and removing it will certainly damage it, if not destroy it.

    3

    Flip the ambrotype over onto a clean surface, preferable one that is covered in a soft, clean material, like white cotton.

    4

    Put on a pair of white cotton gloves or other gloves that will protect the ambrotype from the grease on your hands, which can damage the image. Make sure the gloves are safe for use with photography. The package should say "archival." If it does not, use a different pair of gloves. Do not handle the image without wearing gloves.

    5

    Pry the brass lip over the black backing of the image up with your knife or your fingers, if it is loose enough. Work slowly and carefully to avoid damaging the casing or the image.

    6

    Work the ambrotype free from its casing very gently once the lip has been pried up completely. If you are having trouble removing the image, go back to prying the lip up gently and try again. If you are still have trouble, use a blunt tapered instrument, like a plastic sculpting tool, to pry the ambrotype loose from its frame.

    7

    Remove the black backing with your hands. You will now have a bare glass ambrotype that you can scan or put into a new case, if you desire.


Often compared to daguerreotypes, ambrotypes are antique photographs made by under-exposing a glass plate coated in emulsion, bleaching it and placing a black background behind it. While these images look something like daguerreotypes, the process of creating an ambrotype is very different. The images were popular alternatives to the expensive and painful daguerrotype process because they were easier to produce, required less exposure time (and therefore less pain for the subject) and cost much less than their metallic cousins. If you have an ambrotype, it is most likely in a case that doubles as a frame. This case protects the ambrotype and allows it to be viewed against a black background, but it can be removed very carefully.

Instructions

    1

    Open the ambrotype case and lay it out on a flat surface like a countertop or table. Take care to use a clean surface.

    2

    Use a knife or small chisel to pry the ambrotype and its brass casing from the wooden case. If you find the ambrotype does not separate from the case easily, go no further. The ambrotype is likely cemented to the case and removing it will certainly damage it, if not destroy it.

    3

    Flip the ambrotype over onto a clean surface, preferable one that is covered in a soft, clean material, like white cotton.

    4

    Put on a pair of white cotton gloves or other gloves that will protect the ambrotype from the grease on your hands, which can damage the image. Make sure the gloves are safe for use with photography. The package should say "archival." If it does not, use a different pair of gloves. Do not handle the image without wearing gloves.

    5

    Pry the brass lip over the black backing of the image up with your knife or your fingers, if it is loose enough. Work slowly and carefully to avoid damaging the casing or the image.

    6

    Work the ambrotype free from its casing very gently once the lip has been pried up completely. If you are having trouble removing the image, go back to prying the lip up gently and try again. If you are still have trouble, use a blunt tapered instrument, like a plastic sculpting tool, to pry the ambrotype loose from its frame.

    7

    Remove the black backing with your hands. You will now have a bare glass ambrotype that you can scan or put into a new case, if you desire.



  • How to Remove Super Glue LifeSpy - LifeSpy Lifestyle Blog!

    www.lifespy.com/2007/how-to-remove-super-glue

    Theres this supposedly Golden Rule of the Toolbox. You only need two tools in your toolbox: Duct tape to stick, WD-40 to unstick. I personally have a wide ...


  • General Home Repair - How To Information Page 1 eHow

    www.ehow.com Home & Garden Home Repair & Maintenance

    Don't just sit there scratching your head, find useful info on General Home Repair on eHow. Get essential tips and learn more about everything from How to Fix a Tear ...


  • How to Bypass or Remove a BIOS Password - Technibble

    www.technibble.com/how-to-bypass-or-remove-a-bios-password

    To make computer system changes, you will need access to your BIOS which is locked out by the computer manufacturer. Here's how to be a bios password cracker.


  • How To Remove Baseboards Without Damaging the Wall or

    afloorpro.com/how-to/removing-baseboards-20

    a Flooring Professional - Support for the Floor Covering DIYer and the Flooring Industry


  • House Cleaning - How To Information Page 1 eHow

    www.ehow.com Home & Garden Housekeeping

    Don't just sit there scratching your head, find useful info on House Cleaning on eHow. Get essential tips and learn more about everything from Material Ideas To Clean ...


  • How to successfully remove a nail without damaging wood

    www.instructables.com/id/How-to-successfully-remove-a-nail-without...

    How to successfully remove a nail from a delicate piece of wood without damaging the wood itself.


  • how to open a toshiba portable hard drive (without case damage ...

    www.youtube.com/watch?v=6YYCrFwMrEU

    This video shows you how to open a toshiba portable hard drive without damaging the casing/enclosure


  • How To Remove Scratches from a DVD Disc Repair

    www.howtodothings.com Audio & Video Media

    Use These Tips on Cleaning, Repairing and Resurfacing to Fix Your DVD


  • GH5928 How to Prevent and Remove Mildew Home Methods ...

    extension.missouri.edu Housing Home maintenance

    How to Prevent and Remove Mildew Home Methods Wanda Eubank Department of Environmental Design Betty Feather Department of Textile and Apparel Management


  • How to remove door casing trim without damaging the adjoining ...

    www.youtube.com/watch?v=_wL_LucRT7U

    How to remove door casing trim without damaging the adjoining sheetrock wall is something you want to "know" before you "do it"....damage the adjoining ...

0 comments:

Post a Comment