Sunday, February 3, 2019

How to Frame a Photograph

How to Frame a Photograph

OK, so you have taken a picture you are really proud of. Why not frame it and put in on the wall? It is easy and inexpensive for small photographic prints. An 8-by-10 inch photograph will fit in an 11-by-14 inch frame. They are perfect for decorating your house or office. (Just remember to show off your best work and hang the photographs along with other art so you don't seem like a complete show off.) I prefer to use metal sectional frames for photographs. They are easy to assemble and you can change the photographs in the frames frequently if you desire. They also use pressure spring clips to hold the photo tight to the glass reducing the amount of dirt and dust that can get inside the frame. This article will demonstrate how to frame a photograph using metal sectional frames. Whatever your frame choices--don't hesitate to display your photographs--it will make you feel good.

Instructions

    1
    Mount the Photo

    Mount your photographic print to a mounting board. There are a variety of thicknesses of board and techniques for doing this. I prefer dry mounting which fuses the photograph directly to a mounting board. Dry mounting requires a mounting press and most frame shops will mount photographs to mounting boards for a minimal cost. There are also double-sided tapes, spray mounts and other techniques that you can use and find at your local frame, photographic or art supply store. After mounting the photograph, tape it with the masking tape to the back of the matte. The matte is typically 2 or 3 inches around the image. The matte should be the exact same size as the frame and have any opening that is the exact size of the photographic print.

    2
    Assemble the Frame

    Once you have a mounted photograph, assemble the top and two sides of the sectional frame together. Leave the bottom open and attach the hangers and wire to the frame sides. You can attach the wire after the frame is together, but it is easier to get the hangers in place if you do it prior to assembly.

    3
    Insert matte into the frame

    Clean both sides of the float glass thoroughly with window cleaner and lint-free paper towel. You can also use non-glare glass, but it will slightly impact the contrast of the viewed image. Float glass has few artifacts and will not impact the contrast ratio of the image. Place the matted print on the glass and insert the glass, matte and print into the frame.

    4
    Insert the Bottom

    Insert the bottom part of the frame and tighten the screws on all the joiners at the four corners of the frame. Make sure that the corners line up before tightening the screws.

    5
    Insert Pressure Clips

    Insert the pressure clips. The longer sides will have three pressure clips and the sides will have two pressure clips. Make sure the pressure clips are completely under the frame lip. Give the front glass a final cleaning with glass cleaner. Unless you are an expert, you will get finger prints on the front of the glass during assembly. Hang the print on a wall and impress your friends!


How to Frame a Photograph

OK, so you have taken a picture you are really proud of. Why not frame it and put in on the wall? It is easy and inexpensive for small photographic prints. An 8-by-10 inch photograph will fit in an 11-by-14 inch frame. They are perfect for decorating your house or office. (Just remember to show off your best work and hang the photographs along with other art so you don't seem like a complete show off.) I prefer to use metal sectional frames for photographs. They are easy to assemble and you can change the photographs in the frames frequently if you desire. They also use pressure spring clips to hold the photo tight to the glass reducing the amount of dirt and dust that can get inside the frame. This article will demonstrate how to frame a photograph using metal sectional frames. Whatever your frame choices--don't hesitate to display your photographs--it will make you feel good.

Instructions

    1
    Mount the Photo

    Mount your photographic print to a mounting board. There are a variety of thicknesses of board and techniques for doing this. I prefer dry mounting which fuses the photograph directly to a mounting board. Dry mounting requires a mounting press and most frame shops will mount photographs to mounting boards for a minimal cost. There are also double-sided tapes, spray mounts and other techniques that you can use and find at your local frame, photographic or art supply store. After mounting the photograph, tape it with the masking tape to the back of the matte. The matte is typically 2 or 3 inches around the image. The matte should be the exact same size as the frame and have any opening that is the exact size of the photographic print.

    2
    Assemble the Frame

    Once you have a mounted photograph, assemble the top and two sides of the sectional frame together. Leave the bottom open and attach the hangers and wire to the frame sides. You can attach the wire after the frame is together, but it is easier to get the hangers in place if you do it prior to assembly.

    3
    Insert matte into the frame

    Clean both sides of the float glass thoroughly with window cleaner and lint-free paper towel. You can also use non-glare glass, but it will slightly impact the contrast of the viewed image. Float glass has few artifacts and will not impact the contrast ratio of the image. Place the matted print on the glass and insert the glass, matte and print into the frame.

    4
    Insert the Bottom

    Insert the bottom part of the frame and tighten the screws on all the joiners at the four corners of the frame. Make sure that the corners line up before tightening the screws.

    5
    Insert Pressure Clips

    Insert the pressure clips. The longer sides will have three pressure clips and the sides will have two pressure clips. Make sure the pressure clips are completely under the frame lip.

    Enhance your photography skill,The Top Secret Photography Techniques

    . Give the front glass a final cleaning with glass cleaner. Unless you are an expert, you will get finger prints on the front of the glass during assembly. Hang the print on a wall and impress your friends!



  • How To Build A Water Tower Model For A School Project

    www.47questions.com/how_to_build_a_water_tower_model_for_a_school...

    How To Build A Water Tower Model For A School Project 47Questions.com


  • Build Your Page - How to create a Facebook business Page

    https://www.facebook.com/business/build

    Your Page is the central place to grow your business, build your brand and develop relationships with your customers.


  • How to build a powder coating oven - Smecca.com: A

    www.smecca.com/2012/05/how-to-build-a-powder-coating-oven

    How to build a powder coating oven. WARNING: If the thought of listening to some random dude you've never met going on for hours and hours about sheet metal, oven ...


  • How to Build a Biltong Box How to Make Biltong

    www.biltongbox.info/how-to-build-a-biltong-box

    The first thing you need to do is decide what to use as the box. You could either use wood or cardboard. I have used both in the past. There is no real preference ...


  • How to build a homemade sandblasting cabinet - Smecca.com

    www.smecca.com/2011/02/how-to-build-a-homemade-sandblasting-cabinet

    Building a homemade sandblasting cabinet without sandblasting cabinet plans can be fun. This is how you can build your own DIY media blasting cabinet.


  • Indoor Iguana Cage - How to build an indoor iguana cage - Plans ...

    www.iguanacageplans.com

    Discover how to build an indoor iguana cage. These plans for building an iguana cage will take you step-by-step throught the building of outdoor and indoor Iguana ...


  • How To Create a Website - Beginner Tutorials On How To Make

    www.2createawebsites.com

    How To Create a Website has lots of free web design tutorials for beginners on creating a WordPress website and lots more. Start to make a website today.


  • BuildAHotDogCart.com How to build a hot dog cart

    www.buildahotdogcart.com

    How to build a hot dog cart ... From: Steve Schaible, founder of King Weenie Chicago Style Hot Dogs, St. Louis


  • How to Build Your Own Acoustic Panels (DIY) AcousticsFREQ.com

    acousticsfreq.com/blog/?p=62

    How to Build Your Own Acoustic Panels (DIY) Last Updated on Wednesday, 17 April 2013 06:15 Written by AcousticsFREQ Thursday, 13 October 2011 08:41


  • How to Draw - Free Online Drawing Tutorials - DrawingNow

    www.drawingnow.com

    Learn how to draw, free step by step video drawing tutorials. The best lessons on how to draw cartoons, manga, animals, people and anime. Draw online and share your ...


  • Dumpr - Photo Fun

    www.dumpr.net

    Addictively-fun and simple-to-use online photo effects. Upload photos, create something funny, and share them with your friends.

  • Imikimi.com - Sharing Creativity

    imikimi.comAll Frames How to Create Kimis

    animations, bebo, blogger, card, comments, custom, customizable, drop-in, editor, facebook, frame, free, friendster, generators, graphic, hi5, images, multiply ...

  • Coat Hanger HDTV Antenna! - YouTube

    www.youtube.com/watch?v=EWQhlmJTMzw

    Cheaply, easily an quickly build an HDTV antenna that outperforms amplified store bought antennas! For more great ideas see http://metacafe.com/channels ...

  • How to get six pack abs:6 pack abs workout - YouTube

    www.youtube.com/watch?v=QP4qb_MVn7U

    How to get six pack abs, six pack abs workout, 6 pack abs workout http://www.thephysiqueformula.com/you... FREE report reveals the training secrets of ...

  • retaining walls,how to build retaining walls on a slope,brick ...

    beautifullandscapingideas.net/retaining-walls

    How To Build Retaining Wall. You may want to check your local codes before you start any digging you might need a permit in some cases. Often you wont be bothered ...

  • Follow Me as I build My Own Wood Gasifier and create my own

    powerityourself.com/gasifier-build/build-your-own-high-efficiency...

    Follow my progress as I build a prototype wood gasifier to produce a flammable gas to power a whole house generator ! Learn how you can build one of these ...

  • Layers Magazine The How-to Magazine for Everything Adobe

    layersmagazine.com

    Layers magazine is the "How-to magazine for everything Adobe".

  • Fancy Frugal Life

    fancyfrugallife.com

    The first time I heard you could paint fabric was in the Chalk Paint Basics class I took at 3 Oaks Studio. My Chalk Paint stockist Vicki was telling us how she ...

  • Kodak Facebook

    https://www.facebook.com/kodak

    Kodak. 634,761 likes 3,538 talking about this. Just as Eastman had a goal to make photography "as convenient as the pencil," Kodak continues to expand the ways ...

  • Bitcoin Mining Rigs How to Build a Litecoin or Bitcoin Mining Rig

    www.coinminingrigs.com

    Home-built Litecoin or Bitcoin mining rigs are a great way to invest in the new digital currencies, while avoiding some of the risk involved in purchasing the coins ...

  • DIY Instructables - Share What You Make

    www.instructables.comTechnology Craft Workshop Outside Food

    Instructables is a place that lets you explore, document, and share your DIY creations.

  • Howcast The best how-to videos on the web

    www.howcast.com

    Howcast is the best source for fun, free, and useful how-to videos and guides.

  • How To Create a Website - Beginner Tutorials On How To Make

    www.2createawebsites.com

    How To Create a Website has lots of free web design tutorials for beginners on creating a WordPress website and lots more. Start to make a website today.

0 comments:

Post a Comment