Sunday, June 16, 2013

How to Make a Wooden Field Camera

How to Make a Wooden Field Camera

Bender makes assembling an 8- by 10-inch wooden field camera easy for new enthusiasts who enjoy using this medium, with all parts and pieces included in Bender camera kits. But the real key to accurate assembly is patience. Building your own field camera requires painstaking time and effort. The absence of one or both could prove disastrous to your final product. For this reason, it pays to have some experience in woodworking to come up with a usable camera.

Instructions

    1

    Assemble all three lensboard riders and the lensboard, as instructed. Use wood glue and small, right-angle clamps in assembling the lensboard. Sand the sides and backs smooth and flush.

    2

    Assemble the back holder, making sure the pieces are carefully measured and fitted precisely. Use glue to secure the two vials in place.

    3

    Sand smooth and flush the four pieces of the ground-glass holder. Glue them with right-angle clamps. Glue the four glass spacers in place and cut to shape the ground-glass retainer blocks.

    4

    Use C clamps to attach the two pieces of the backside. Sand to smooth. Use the lensboard holder to attach the sanded front standard to its sides. Glue and secure with right-angle clamps.

    5

    Glue the rear standard and then use a jigsaw to notch the standard's back. Chip out the middle by making two parallel cuts. Next mount the L screws into the standard's pilot holes.

    6

    Use wood finish, such as Danish oil or wax. to help bind the parts, and paint for the light traps. Use masking tape to protect areas that need no paint. Then remove tape before the paint hardens.

    7

    Mount the bellows.


How to Make a Wooden Field Camera

Bender makes assembling an 8- by 10-inch wooden field camera easy for new enthusiasts who enjoy using this medium, with all parts and pieces included in Bender camera kits. But the real key to accurate assembly is patience. Building your own field camera requires painstaking time and effort. The absence of one or both could prove disastrous to your final product. For this reason, it pays to have some experience in woodworking to come up with a usable camera.

Instructions

    1

    Assemble all three lensboard riders and the lensboard, as instructed. Use wood glue and small, right-angle clamps in assembling the lensboard. Sand the sides and backs smooth and flush.

    2

    Assemble the back holder, making sure the pieces are carefully measured and fitted precisely. Use glue to secure the two vials in place.

    3

    Sand smooth and flush the four pieces of the ground-glass holder. Glue them with right-angle clamps. Glue the four glass spacers in place and cut to shape the ground-glass retainer blocks.

    4

    Use C clamps to attach the two pieces of the backside.

    Enhance your photography skill,The Top Secret Photography Techniques

    . Sand to smooth. Use the lensboard holder to attach the sanded front standard to its sides. Glue and secure with right-angle clamps.

    5

    Glue the rear standard and then use a jigsaw to notch the standard's back. Chip out the middle by making two parallel cuts. Next mount the L screws into the standard's pilot holes.

    6

    Use wood finish, such as Danish oil or wax. to help bind the parts, and paint for the light traps. Use masking tape to protect areas that need no paint. Then remove tape before the paint hardens.

    7

    Mount the bellows.



  • MAKE DIY projects, how-tos, and inspiration from geeks, makers ...

    makezine.comProjects DIY Projects

    MAKE - DIY projects, how-tos, and inspiration from geeks, makers, and hackers


  • How to Make a Homemade TV Antenna TV Antenna Plans

    www.tvantennaplans.com

    TV Antennas do not need to be complicated or expensive. There are some simple yet effective homemade TV Antenna designs that can be built at home with parts you may ...


  • FAQ - CHDK Wiki

    chdk.wikia.com/wiki/FAQ

    A: CHDK enhances the capabilities of your camera in a non-destructive, non-permanent way. After...


  • How To Make Strawberry Jam : Taste of Southern

    www.tasteofsouthern.com/how-to-make-strawberry-jam

    Were canning and preserving Strawberry Jam today on Taste of Southern. This recipe is one of the best ways to get started in the home canning and preservation of ...


  • wikiHow - How to do anything

    www.wikihow.comRelationships Articles Hobbies and Crafts Youth

    Wiki Work together to make how to better for everyone. Find ways to get started or take our tour.


  • DIY Instructables - Share What You Make

    www.instructables.comTechnology Craft Workshop Outside Food

    3 Simple Ways to Share What You Make. With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.


  • Hunting - How To Information Page 1 eHow

    www.ehow.com Sports & Fitness Recreation

    Don't just sit there scratching your head, find useful info on Hunting on eHow. Get essential tips and learn more about everything from How to Get a Hunting License ...


  • Wonder How To Show & Tell for Creators & Doers

    www.wonderhowto.com

    Improvised Handheld Fireworks: How to Make Homemade Sparklers for the 4th of July. Yesterday 9:37 AM The big fireworks day is almost here, but most of ...


  • How Everything Works - How Everything Works Home Page

    www.howeverythingworks.org

    How Everything Works Part of a website that provides answers to everyday questions about physics, science, and how things in the world around us work.

0 comments:

Post a Comment