Friday, August 25, 2017

How to Build a Video Camera Stabilizer

If you are an aspiring cameraman or -woman, you know how difficult it can be to get stable shots without the use of a tripod. However, lugging around a huge tripod can be a pain, and waiting to shoot until you have set it up can cause you to miss great shots. There is a simple and effective hand stabilizer that you can make in around an hour that will enable you to shoot stable shots without the hassle of using a tripod. All you need are a few items from around the house and some metal pieces.

Instructions

    1

    Cut all metal pieces to the right lengths. Wear protective eyewear when completing this step. Drill a -inch hole one inch away from each end of the flat aluminum pieces. You should have two holes on each piece of metal.

    2

    Drill two holes in the middle of one of the pieces of aluminum to the size that matches the tripod mounting hole on your camera. Drill a hole in the middle of the other piece of metal to use as a mount of a microphone later. Each piece of metal will now have three holes. Glue one bolt inside one of the holes to easily find where to mount the camera.

    3

    Cut 4 small pieces of broom handle to three inches each. Drill a hole down the middle of each piece, large enough for the threaded rod to fit through. Fit the pieces of wood into the ends of each pipe.

    4

    Screw the threaded rod to each side of one of the flat metal pieces. Slide the bicycle grips over the pipe with the wooden pieces inside. Slide the pipe over the threaded metal. Now you will repeat this step on the pipes for the opposite side.

    5

    Take the other piece of flat metal and screw one nut and bolt to each side of the other piece of threaded metal. You should now have a rectangle with the two bicycle grips making up the short sides, and the metal making up the longer sides.

    6

    Screw a microphone or light bracket to the top of the metal siding. You can use this to make even more professional looking videos.

    7

    Attach the camera to the inside of the video stabilizer using the tripod screw holes on the bottom of the camera. Hold the sides of the stabilizer where the bicycle grips are. Use the stabilizer to shoot stable and professional looking shots. You are finished making your own video camera stabilizer.


If you are an aspiring cameraman or -woman, you know how difficult it can be to get stable shots without the use of a tripod. However, lugging around a huge tripod can be a pain, and waiting to shoot until you have set it up can cause you to miss great shots. There is a simple and effective hand stabilizer that you can make in around an hour that will enable you to shoot stable shots without the hassle of using a tripod. All you need are a few items from around the house and some metal pieces.

Instructions

    1

    Cut all metal pieces to the right lengths. Wear protective eyewear when completing this step. Drill a -inch hole one inch away from each end of the flat aluminum pieces. You should have two holes on each piece of metal.

    2

    Drill two holes in the middle of one of the pieces of aluminum to the size that matches the tripod mounting hole on your camera. Drill a hole in the middle of the other piece of metal to use as a mount of a microphone later. Each piece of metal will now have three holes. Glue one bolt inside one of the holes to easily find where to mount the camera.

    3

    Cut 4 small pieces of broom handle to three inches each. Drill a hole down the middle of each piece, large enough for the threaded rod to fit through. Fit the pieces of wood into the ends of each pipe.

    4

    Screw the threaded rod to each side of one of the flat metal pieces. Slide the bicycle grips over the pipe with the wooden pieces inside.

    Enhance your photography skill,The Top Secret Photography Techniques

    . Slide the pipe over the threaded metal. Now you will repeat this step on the pipes for the opposite side.

    5

    Take the other piece of flat metal and screw one nut and bolt to each side of the other piece of threaded metal. You should now have a rectangle with the two bicycle grips making up the short sides, and the metal making up the longer sides.

    6

    Screw a microphone or light bracket to the top of the metal siding. You can use this to make even more professional looking videos.

    7

    Attach the camera to the inside of the video stabilizer using the tripod screw holes on the bottom of the camera. Hold the sides of the stabilizer where the bicycle grips are. Use the stabilizer to shoot stable and professional looking shots. You are finished making your own video camera stabilizer.



  • Think beyond the duct tape wallet. - How to make stuff out of duct ...

    www.artduck-o.com

    Duct-Tape Alligator Puppet. August 27th, 2012 No Comments ' Date: 2012.08.27 Category: Craft, Kids, Ramblings Response: 0 (NOTE: I *know* its been a crazy ...


  • HOW TO videomapping.org - a blog for people interested in ...

    videomapping.org/?page_id=42

    Even if she was using a good camera in picture number 2 and a wide angle one from her phone in picture number 1 the object is not matching the beamer lens throw.


  • How to get six pack abs:6 pack abs workout - YouTube

    www.youtube.com/watch?v=QP4qb_MVn7U

    How to get six pack abs, six pack abs workout, 6 pack abs workout http://www.thephysiqueformula.com/you... FREE report reveals the training secrets of ...


  • Howcast The best how-to videos on the web

    www.howcast.com

    Howcast is the best source for fun, free, and useful how-to videos and guides.


  • Wonder How To Show & Tell for Creators & Doers

    www.wonderhowto.com/following

    Wonder How To is your guide to free how to videos on the Web. Search, Browse and Discover the best how to videos across the web using the largest how to video index ...


  • $14 Camera Stabilizer

    14dollarstabilizer.org

    Camera stabilizers are attachments used to capture smooth looking video even when the camera and camera operator are in motion. The camera operator may walk (or


  • How To Create a Website - Beginner Tutorials On How To Make

    www.2createawebsites.com

    How To Create a Website has lots of free web design tutorials for beginners on creating a WordPress website and lots more. Start to make a website today.


  • How to make a BristleBot - Evil Mad Scientist Laboratories -

    www.youtube.com/watch?v=rUSTXUis_ys

    Sure, you can BUY a hexbug, but that really isn't the point. I (and several other people) help kids MAKE these as a fun, science-y activity, to get them ...


  • How To Become A Model - Modeling Portfolios - Fashion,

    www.purestorm.com

    Purestorm aims to help you become a successful model, for all types of modeling including glamour, fashion, photographic, teen and many others. Sign up for a free ...


  • Money eHow UK - eHow How to Videos, Articles & More -

    www.ehow.co.uk/money

    Money: Find great tips on The worst jobs in the UK, Bizarre business names or what not to call yours and The 8 worst UK cities and towns to live in. Learn about ...


  • Flickr: Camera Finder - Welcome to Flickr - Photo Sharing

    www.flickr.com/cameras

    These graphs show the number of Flickr members who have uploaded at least one photo or video with a particular camera on a given day over the last year.

  • Flickr: Tools to upload and share

    www.flickr.com/tools

    Help / Tools. Getting your stuff onto Flickr There are loads of tools to upload your photos and videos. Uploading on Flickr.com. One of the easiest ways to get your ...

0 comments:

Post a Comment