Shooting photographs outdoors often results with subjects that have dark shadows on their faces and even under the eyes. Camera-mounted flashes tend to get used primarily indoors, not outdoors. But by using just enough flash to eliminate the shadows, the photographer will end up with a picture where the subject and the background are evenly lit.
Nikon's SB-800 flash is a powerful unit that is capable of handling most situations that a photographer will encounter. The SB-800 is well suited for fill flash photography and it is easy to manually adjust the flash's exposure compensation settings. Follow the steps below and see for yourself how using a flash outdoors will improve your photography.
Instructions
- 1
Mount the SB-800 on the camera body. Turn on the camera and flash, and get familiar with the flash controls. With the flash in the "TTL" mode, press the "SEL" button to highlight the Flash output level compensation value.
2Use the "+" or "-" buttons, which are located above and below the "SEL" button, to adjust the exposure compensation. The exposure can be set from "-3 EV" to "+3EV" in one to three steps. Press the "SEL" button one more time when the correct setting has been selected.
3Position the subject as desired outdoors, and take a photograph with the flash turned off. Review the photograph in the camera's LCD screen. If the subject has unwanted shadows or is dark compared to the background, turn on the flash and take another shot at "0" compensation. Normally, a full power flash setting will wash out or leave hotspots on the subject. If this is the case, proceed to Step 4.
4
Take a series of photographs while varying the exposure compensation, as described in Steps 1 and 2. Start at "-1EV," and depending on the results, adjust compensation up or down. After each shot, carefully review that photograph until the setting is found that produces a result that the photographer likes.
Shooting photographs outdoors often results with subjects that have dark shadows on their faces and even under the eyes. Camera-mounted flashes tend to get used primarily indoors, not outdoors. But by using just enough flash to eliminate the shadows, the photographer will end up with a picture where the subject and the background are evenly lit.
Nikon's SB-800 flash is a powerful unit that is capable of handling most situations that a photographer will encounter. The SB-800 is well suited for fill flash photography and it is easy to manually adjust the flash's exposure compensation settings. Follow the steps below and see for yourself how using a flash outdoors will improve your photography.
Instructions
- 1
Mount the SB-800 on the camera body. Turn on the camera and flash, and get familiar with the flash controls. With the flash in the "TTL" mode, press the "SEL" button to highlight the Flash output level compensation value.
2Use the "+" or "-" buttons, which are located above and below the "SEL" button, to adjust the exposure compensation. The exposure can be set from "-3 EV" to "+3EV" in one to three steps.
Enhance your photography skill,The Top Secret Photography Techniques
. Press the "SEL" button one more time when the correct setting has been selected. 3Position the subject as desired outdoors, and take a photograph with the flash turned off. Review the photograph in the camera's LCD screen. If the subject has unwanted shadows or is dark compared to the background, turn on the flash and take another shot at "0" compensation. Normally, a full power flash setting will wash out or leave hotspots on the subject. If this is the case, proceed to Step 4.
4Take a series of photographs while varying the exposure compensation, as described in Steps 1 and 2. Start at "-1EV," and depending on the results, adjust compensation up or down. After each shot, carefully review that photograph until the setting is found that produces a result that the photographer likes.
Guide to Nikon TTL Flashes - Page 2 - photo.net
photo.net/equipment/nikon/guide-to-ttl-flashes/?p=2Read about Nikon's current offering of flashes and accessories on Photo.net. Shun Cheung compares the SB-900, SB-800, SB-600, and SB-400, and offers detailed
How To Use A Single Nikon SB-800 As A Wireless Slave
digital-photography-school.com/forum/other-digital-photography...Being an up-and-coming photographer myself, I do not have oodles of money to spend on new equipment. Ideally, I would like to have two or even three
Digital Cameras - How To Information Page 1 eHow
www.ehow.com Electronics CamerasDon't just sit there scratching your head, find useful info on Digital Cameras on eHow. Get essential tips and learn more about everything from Canon EOS 40D: Custom ...
Guide to Nikon TTL Flashes - photo.net - Photography community ...
photo.net/equipment/nikon/guide-to-ttl-flashesRead about Nikon's current offering of flashes and accessories on Photo.net. Shun Cheung compares the SB-900, SB-800, SB-600, and SB-400, and offers detailed
Nikon SB 800 Speedlight Shoe Mount Flash for Nikon eBay
www.ebay.com/ctg/Nikon-SB-800-Speedlight-Shoe-Mount-Flash-Nikon...Rating: 4.5/5 100 reviews $22.45eBay: Speedlight SB-800 is the foundation of the new Nikon Creative Lighting System for the Nikon D2H digital SLR. The new i-TTL Flash Control system supports ...
How to use your Nikon SB-800 with a non CLS camera - YouTube
www.youtube.com/watch?v=kjzw6IIyh74Make your Nikon SB-800 work off camera with ANY camera with a flash. NOTE: This only works if you can turn off your pre-flash.
SB-800 AF Speedlight from Nikon
www.nikonusa.com/en/Nikon.../Flashes/4801/SB-800-AF-Speedlight-.htmlRating: 4.5/5 12 reviewsBehind every Nikon COOLPIX camera is the fundamental idea that photography should bring you joy. Stylish, compact and easy to use, you'll capture every precious ...
How to use off camera flash - YouTube
www.youtube.com/watch?v=AVBhnJnDcnMChris Rutter teaches you the basics of wireless flash systems. He also goes into detail by showing you the basic settings for wireless flash with a Nikon ...
0 comments:
Post a Comment