Saturday, March 31, 2018

How to Make a Pinhole Camera Using 110 Film

Introduced in the early 1970s, 110 film was originally made for less expensive cameras. These days, 110 film is more difficult to locate because some major retailers no longer carry it and the camera companies themselves produce less of it. In many cases, it is more difficult to find than 35mm film. Because of its packaging, though, 110 film is great for making a pinhole camera, needing few materials and little time.

Instructions

    1

    Look on the back of your film canister and wind your film, using the cog on the top of the film canister until you have passed several arrows and reached the second number 1 on the canister. Whenever you take an exposure, wind your film past the arrows until you reach the second number in the series of four. Since this may differ with each brand of film, you may want to test how much the film needs to be wound so you don't ruin a roll with double exposures.

    2

    Measure the width and height of your film hole. Cut a small piece of aluminum that size from your clean aluminum can.

    3

    Using a pin, create a tiny hole in the center of the piece of aluminum you just cut out of the can.

    4

    Tape the aluminum piece down onto the 110 film canister, covering the film, using your electrical tape. Tape anywhere else where light may come through, but leave your film counter on the back of the film visible.

    5

    Expose your film (see the link in Resources).

    6

    Take your film into a photo development store for processing.


Introduced in the early 1970s, 110 film was originally made for less expensive cameras. These days, 110 film is more difficult to locate because some major retailers no longer carry it and the camera companies themselves produce less of it. In many cases, it is more difficult to find than 35mm film. Because of its packaging, though, 110 film is great for making a pinhole camera, needing few materials and little time.

Instructions

    1

    Look on the back of your film canister and wind your film, using the cog on the top of the film canister until you have passed several arrows and reached the second number 1 on the canister.

    Enhance your photography skill,The Top Secret Photography Techniques

    . Whenever you take an exposure, wind your film past the arrows until you reach the second number in the series of four. Since this may differ with each brand of film, you may want to test how much the film needs to be wound so you don't ruin a roll with double exposures.

    2

    Measure the width and height of your film hole. Cut a small piece of aluminum that size from your clean aluminum can.

    3

    Using a pin, create a tiny hole in the center of the piece of aluminum you just cut out of the can.

    4

    Tape the aluminum piece down onto the 110 film canister, covering the film, using your electrical tape. Tape anywhere else where light may come through, but leave your film counter on the back of the film visible.

    5

    Expose your film (see the link in Resources).

    6

    Take your film into a photo development store for processing.



  • How to Make a Pinhole Camera eHow

    www.ehow.com Crafts Amateur Photography

    Recycle those oatmeal boxes and used cookie tins by making wacky-looking cameras that will amaze your friends. Other People Are Reading How to make a pinhole ...


  • The Ultimate Guide to Create Your Own 35mm Pinhole Camera

    photo.tutsplus.com/tutorials/the-ultimate-guide-to-create-y

    Why spend $3,000 on the newest and greatest camera when you can make one at home and at the same time participate in a centuries old tradition of image making?


  • How to Make a Pinhole Camera for Kids eHow

    www.ehow.com Hobbies, Games & Toys Crafts Kids Crafts

    Pinhole cameras are a great craft to use in science class when you are ready to teach children about light, and how the eye works. The tiny pinhole is the same as ...


  • How to Make a Pinhole Camera from a 35mm Film Canister --

    www.youtube.com/watch?v=xbXyn3lymg4

    A video showing how to make, load, and use a pinhole camera from a 35mm film canister. Takes a different, simpler approach than other pinhole cameras made ...


  • KODAK: How to Make a Pinhole Camera - Can Or Box

    www.kodak.com/.../lessonPlans/pinholeCamera/pinholeCanBox.shtml

    When you make a pinhole camera to accept roll or sheet film, use a small, light-tight can or box as the camera body. You can use any can that has a tight-fitting top.


  • The Pinhegg My Journey To Build An Egg Pinhole Camera -

    www.lomography.com/magazine/lifestyle/2011/04/23/the-pinhegg-my...

    Since I started pin-holing the world, I have had the strong desire to make a special camera, with the purpose of shooting just one photograph. The purpose was to ...


  • How To Make A Pinhole Camera (Cool Experiments)

    www.videojug.com School Subjects Cool ExperimentsRating: 5/5 1 rating

    Video : This video is a step-by-step instructional project guide, explaining how to make a pinhole camera using simple everyday home items. It's a great project to do ...


  • How To Make A Pinhole Camera

    www.instructables.com/id/How-To-Make-A-Pinhole-Camera

    Make your own camera out of materials around the house and take black and white photos with it.


  • How to Make and Use a Pinhole Camera

    www.kodak.com/ek/US/en/Pinhole_Camera.htm

    How to Make and Use a Pinhole Camera ... close. We're pleased that you want to share this information. To send a link to this page, fill in the information below.


  • How to Make a Pintoid Camera: 23 Steps - wikiHow

    www.wikihow.com Photography Photographic DIY

    How to Make a Pintoid Camera. One of the many things you can do with an Altoids tin is make a pinhole camera, or a "Pintoid" camera, that can capture scenery. Not ...

0 comments:

Post a Comment