Tuesday, August 30, 2016

How to Use an Eclipse Umbrella

An Eclipse umbrella is a relatively inexpensive device that assists in controlling the lighting of a photograph. The umbrella is is made of a reflective material that bounces and diffuses light on specific areas. An umbrella on a light-stand allows the photographer to focus light where it is needed. The umbrella's support ribs are covered with reflective material to prevent any loss of light

Instructions

    1

    Open the light stand and position it near the subject being photographed. This is a temporary location. Move the stand when you adjust the lighting.

    2

    Screw an umbrella adapter on the end of the light stand.

    3

    Remove the Eclipse umbrella from its sheath. Open it by pushing up on the runner located on the umbrella shaft. Push up the runner until the umbrella is locked in place.

    4

    Insert the end of the umbrella into the hole in the light-stand adapter; adjust the umbrella to the desired length. Use the thumbscrew on the adapter to tighten the umbrella in place. Loosen and tighten the thumbscrew to adjust the umbrella's angle.

    5

    Attach a flash or light source on top of the light-stand adapter. Aim the light source at the interior of the umbrella; this reflects light on the subject. Reposition the light and umbrella as needed.


An Eclipse umbrella is a relatively inexpensive device that assists in controlling the lighting of a photograph. The umbrella is is made of a reflective material that bounces and diffuses light on specific areas. An umbrella on a light-stand allows the photographer to focus light where it is needed. The umbrella's support ribs are covered with reflective material to prevent any loss of light

Instructions

    1

    Open the light stand and position it near the subject being photographed. This is a temporary location. Move the stand when you adjust the lighting.

    2

    Screw an umbrella adapter on the end of the light stand.

    3

    Remove the Eclipse umbrella from its sheath. Open it by pushing up on the runner located on the umbrella shaft. Push up the runner until the umbrella is locked in place.

    4

    Insert the end of the umbrella into the hole in the light-stand adapter; adjust the umbrella to the desired length. Use the thumbscrew on the adapter to tighten the umbrella in place. Loosen and tighten the thumbscrew to adjust the umbrella's angle.

    5

    Attach a flash or light source on top of the light-stand adapter. Aim the light source at the interior of the umbrella; this reflects light on the subject. Reposition the light and umbrella as needed.



  • [How-To] Using tiny umbrella to update/downgrade/restore

    modmyi.com/forums/general/725672-how-using-tiny-umbrella-update...

    This guide is for people wanting to use tiny umbrella to restore to firmwares Apple is no longer signing. Currently Apple is signing: 6.1.3 and 4.1(3G/3GS only for 4 ...


  • How to load my app from Eclipse to my Android phone instead of

    stackoverflow.com/questions/4992357/how-to-load-my-app-from...

    Eclipse will choose the device (or virtual device) that most closely matches the API version of your project, unless you're in manual mode. If your phone is 2.1 (API ...


  • Eclipse Subversive - Subversion (SVN) Team Provider

    www.eclipse.org/subversive

    Eclipse Subversive - Subversion (SVN) Team Provider. The Subversive project is aimed to integrate the Subversion (SVN) version control system with the Eclipse platform.


  • How to use Umbrella Rigs / How to retrieve a SNAGGED RIG-

    www.youtube.com/watch?v=0xoqS59Tz2I

    using Cow Catcher umbrella Rigs.How to deploy an Umbrella rig, How to save a snagged U-rig. Basics. www.cowcatcherumbrellarigs.com


  • How to Collect blood with the BD Vacutainer Eclipse Needle ...

    medical-diagonosis.wonderhowto.com/how-to/collect-blood-with-bd...

    Check out this video to see how to collect blood with the BD Vacutainer Eclipse Blood Collection Needle. The BD Eclipse Blood Collection Needle is a safety-engineered ...


  • How To: Create a Simple Java Program Using Eclipse - YouTube

    www.youtube.com/watch?v=lXVE34i-QMc

    This beginner-oriented tutorial walks through all the steps to create a very basic program in Java which will sum all numbers from 1 to n. It begins with ...


  • How to properly set your amplifier gains using the DMM method ...

    www.club3g.com/.../120365-how...using-dmm-method-please-sticky.htmlLast updated: Mar 31, 2009 15 posts First post: Jan 27, 2009

    Club3G Forum : Mitsubishi Eclipse 3G Forums > Non-Performance Car Forums > Car Audio and Electronics: How to properly set your amplifier gains using the DMM


  • Solar Eclipse: A How-To Guide for Viewing Eclipses Exploratorium

    www.exploratorium.edu/eclipse/how.html

    This is probably the most important part of this website. If you ever want to view a solar eclipsewhether its total, annular, or partialthe first ...


  • IRC FAQ - Eclipsepedia - Eclipse - The Eclipse Foundation open ...

    wiki.eclipse.org/IRC_FAQ

    General I'm new, what should I read first? Recommended Eclipse Reading List; The Official Eclipse FAQs - Getting Started; What are eclipse and eclipse-dev about?


  • How to Develop A Web Service And Client In Java (Using Eclipse ...

    www.windowstechupdates.com/how-to-develop-a-web-service-and-client...

    Tweet; Email; Sharebar; Tweet; Email; Introduction : The Purpose of this tutorial is to Demonstrate the New introduced Web Axis2 Web service Tool using WTP 2.0 Driver ...


  • Wonder How To Show & Tell for Creators & Doers

    www.wonderhowto.com

    Wonder How To is your guide to free how to videos on the Web. Search, Browse and Discover the best how to videos across the web using the largest how to video index ...


  • Eclipse Downloads

    www.eclipse.org/downloads

    Eclipse Standard 4.3, 198 MB Downloaded 180,830 Times Other Downloads The Eclipse Platform, and all the tools needed to develop and debug it: Java and Plug-in ...


  • How to override equals and hashCode method in Java - Example,

    javarevisited.blogspot.com/2011/02/how-to-write-equals-method-in...34 posts By Javin Paul Published Feb 23, 2011

    Feb 20, 2011 equals and hashcode are most important method of Java object class and at the same time tricky also,this post shows example of


  • Do It Yourself Car Maintenance - How To Information Page 1

    www.ehow.com Cars Car Maintenance

    Don't just sit there scratching your head, find useful info on Do It Yourself Car Maintenance on eHow. Get essential tips and learn more about everything from How to ...

  • Eclipse Internet Access

    www.netcarrier.com

    Eclipse Internet is NJ New Jersey's best Internet service provider for business and personal Internet access via fractional and full T-1s, leased lines, frame relay ...

  • JavaFX Documentation Home JavaFX 2 Tutorials and Documentation

    docs.oracle.com/javafx

    After you decide what controls you want in your UI, use one of the built-in layout panes to manage the size and position of the controls.

0 comments:

Post a Comment