Wednesday, July 10, 2019

DIY Lightsphere

DIY Lightsphere

The Lightsphere is a flash diffuser created by photographer Gary Fong. Designed to be used with a flash that is tipped to bounce off the ceiling, the Lightsphere allows softer, diffuse light to fill in shadows that the bounced light would create on its own. Essentially, it turns an accessory flash into a small softbox, providing more flattering light than the flash can on its own.

Instructions

    1

    Cut the neck of the milk jug off using the utility knife and discard. Set your flash in the ceiling bounce position. Visualize how you will enlarge the opening on the milk jug to fit snugly over the flash, with the jug handle toward the back of the unit.

    2

    Use the marker to approximate cut lines around the existing opening. Plan to make a pair of straight cuts to each side of the opening, leaving flaps to provide a friction fit to hold the diffuser in place. Test fit the diffuser over your flash.

    3

    Trim the flaps of excess length. Be sure the diffuser does not block any sensors on the flash itself. Trim away additional plastic if this is the case. Depending on your flash and the design of the original milk bottle, additional customization may be required.

    4

    Use the diffused flash as you normally would. Most camera and flash systems with TTL metering will adjust for the reduced light. If not, use exposure compensation on your camera to allow additional exposure.


DIY Lightsphere

The Lightsphere is a flash diffuser created by photographer Gary Fong. Designed to be used with a flash that is tipped to bounce off the ceiling, the Lightsphere allows softer, diffuse light to fill in shadows that the bounced light would create on its own. Essentially, it turns an accessory flash into a small softbox, providing more flattering light than the flash can on its own.

Instructions

    1

    Cut the neck of the milk jug off using the utility knife and discard. Set your flash in the ceiling bounce position. Visualize how you will enlarge the opening on the milk jug to fit snugly over the flash, with the jug handle toward the back of the unit.

    2

    Use the marker to approximate cut lines around the existing opening. Plan to make a pair of straight cuts to each side of the opening, leaving flaps to provide a friction fit to hold the diffuser in place. Test fit the diffuser over your flash.

    3

    Trim the flaps of excess length. Be sure the diffuser does not block any sensors on the flash itself. Trim away additional plastic if this is the case. Depending on your flash and the design of the original milk bottle, additional customization may be required.

    4

    Use the diffused flash as you normally would. Most camera and flash systems with TTL metering will adjust for the reduced light. If not, use exposure compensation on your camera to allow additional exposure.



  • DIY Gary Fong Lightsphere - Instructables - Make, How To, and DIY

    www.instructables.com/id/DIY-Gary-Fong-Lightsphere/step8/Before...

    Below are three sample shots of different lighting conditions: 1. Straight flash 2. Stofen Omni-Bounce 3. AG Bouncer


  • Lighting Group Photos with Gary Fong Lightsphere - YouTube

    www.youtube.com/watch?v=HoC_TFZGwk8

    Sign in with your Google Account (YouTube, Google+, Gmail, Orkut, Picasa, or Chrome) to add brianfry 's video to your playlist.


  • The DIY Gary Fong Lightsphere [photography] - YouTube

    www.youtube.com/watch?v=3TnGFYXA5qc

    Get great results from your photography while saving a ton with this great little do-it-yourself alternative to the Gary Fong Lightsphere! The drawer liner ...


  • DIY Gary Fong Lightsphere - Instructables - Make, How To, and DIY

    www.instructables.com/id/DIY-Gary-Fong-Lightsphere

    Hello! My name is Artur Gajewski and I'm the guy who never buys a fancy looking flash diffusers because I realized I could make one myself for the fr...


  • Gary Fong LightSphere Flip-Cage Camera Flash Accessories ...

    www.garyfongestore.com

    Gary Fong, a world famous photographer, created Lightsphere to diffuse camera flash for optimum quality. Find a myriad of professional-quality photographic supplies here.

  • The DIY Gary Fong Lightsphere [photography] - YouTube

    www.youtube.com/watch?v=3TnGFYXA5qc

    Get great results from your photography while saving a ton with this great little do-it-yourself alternative to the Gary Fong Lightsphere! The drawer liner ...

  • DIY Gary Fong Lightsphere - Instructables - Make, How To, and DIY

    www.instructables.com/id/DIY-Gary-Fong-Lightsphere

    Hello! My name is Artur Gajewski and I'm the guy who never buys a fancy looking flash diffusers because I realized I could make one myself for the fr...

  • Lighting Group Photos with Gary Fong Lightsphere - YouTube

    www.youtube.com/watch?v=HoC_TFZGwk8

    Sign in with your Google Account (YouTube, Google+, Gmail, Orkut, Picasa, or Chrome) to add brianfry 's video to your playlist.

  • Gary Fong LightSphere Flip-Cage Camera Flash Accessories ...

    www.garyfongestore.com

    Gary Fong, a world famous photographer, created Lightsphere to diffuse camera flash for optimum quality. Find a myriad of professional-quality photographic supplies here.

  • DIY Gary Fong Lightsphere - Instructables - Make, How To, and DIY

    www.instructables.com/id/DIY-Gary-Fong-Lightsphere/step8/Before...

    Below are three sample shots of different lighting conditions: 1. Straight flash 2. Stofen Omni-Bounce 3. AG Bouncer

0 comments:

Post a Comment