Friday, July 15, 2016

Problems With Developing Film

Processing and developing photographic film is a precise and often difficult process. Numerous problems can occur, especially for amateurs learning to develop film and depending on what exactly the issue is---from loading or exposing the film to misuse of the chemicals in the dark room.

Exposure Problems

    If the film has been overexposed, the film will come out completely dark or black, including the spaces that would border the negative's images. One must remember that any exposure to light after taking the picture will overexpose the film. Underexposed film will be faint to completely clear. This can only happen from taking the picture, perhaps because the film wasn't properly loaded or perhaps the shutter didn't work. This will also happen if the fixer was added before the developer.

Development Problems

    If the film has been properly exposed, it can still come out too light or dark from improper development. The developing chemicals' amount and temperature must be precise, along with the time and agitation. If the developer was too cold or diluted, or if the film was not developed long enough with insufficient agitation, the film will come out faint. The film will come out dark if it was in the developer too long or over-agitated or if the chemicals were too hot or over-concentrated.

Uneven Development

    Other improper development methods can result in an uneven development. If there wasn't enough chemicals for the amount of film, it will be underdeveloped and lighter on one side. Agitation that was too vigorous can cause the developer to rush through the film's sprocket holes, leading to dense patches on the negatives. Underdeveloped patches are a result of the film coming into contact with itself; this is because the film was improperly loaded onto the reel.

Fixing Problems

    Even after proper exposure and developing, the fixing solution can cause problems. The film will look cloudy if it wasn't exposed to the fixer long enough or if the fixer was too old or diluted. This problem can be corrected, however, by placing the film back into the fixer and using fresh solution.

Damaged Surfaces

    If you used dirty water in the chemicals or dust got on the film while drying, the dust will embed on the surface. Handling the film roughly can scratch and scuff it, especially on the front emulsion side. Even a piece of dirt can scratch the emulsion and will cause a straight, long scratch if dragged across it. If water droplets form on the film while drying, they will leave circular residue marks. If the film was kinked while loading it onto the reel, this will result in clear, crescent-shaped marks on the film.


Processing and developing photographic film is a precise and often difficult process. Numerous problems can occur, especially for amateurs learning to develop film and depending on what exactly the issue is---from loading or exposing the film to misuse of the chemicals in the dark room.

Exposure Problems

    If the film has been overexposed, the film will come out completely dark or black, including the spaces that would border the negative's images. One must remember that any exposure to light after taking the picture will overexpose the film. Underexposed film will be faint to completely clear. This can only happen from taking the picture, perhaps because the film wasn't properly loaded or perhaps the shutter didn't work. This will also happen if the fixer was added before the developer.

Development Problems

    If the film has been properly exposed, it can still come out too light or dark from improper development. The developing chemicals' amount and temperature must be precise, along with the time and agitation. If the developer was too cold or diluted, or if the film was not developed long enough with insufficient agitation, the film will come out faint. The film will come out dark if it was in the developer too long or over-agitated or if the chemicals were too hot or over-concentrated.

Uneven Development

    Other improper development methods can result in an uneven development. If there wasn't enough chemicals for the amount of film, it will be underdeveloped and lighter on one side. Agitation that was too vigorous can cause the developer to rush through the film's sprocket holes, leading to dense patches on the negatives. Underdeveloped patches are a result of the film coming into contact with itself; this is because the film was improperly loaded onto the reel.

Fixing Problems

    Even after proper exposure and developing, the fixing solution can cause problems.

    Enhance your photography skill,The Top Secret Photography Techniques

    . The film will look cloudy if it wasn't exposed to the fixer long enough or if the fixer was too old or diluted. This problem can be corrected, however, by placing the film back into the fixer and using fresh solution.

Damaged Surfaces

    If you used dirty water in the chemicals or dust got on the film while drying, the dust will embed on the surface. Handling the film roughly can scratch and scuff it, especially on the front emulsion side. Even a piece of dirt can scratch the emulsion and will cause a straight, long scratch if dragged across it. If water droplets form on the film while drying, they will leave circular residue marks. If the film was kinked while loading it onto the reel, this will result in clear, crescent-shaped marks on the film.



  • How to Develop Kodachrome Film (B&W Hand Processing &

    digital-photography.wonderhowto.com/how-to/develop-kodachrome-film...

    Remember KODACHROME? That color reversal film from Kodak? The film that was the inspiration for Paul Simon? The only brand of film to have a state park named after it?


  • I wanna... cheap film 35mm developing??? -

    forums.moneysavingexpert.com Discount Codes 'n Vouchers

    Discount Codes 'n Vouchers ... Not too long ago I saw a thread here with discounts for prints from digital pics. I ... Sorry if I've missed the reply to this email ...


  • Episode 20, how to develop black and white film - YouTube

    www.youtube.com/watch?v=rROBVLNEb3M

    For questions, comments and more info visit prophotolife.com and search for video episode 20.


  • Universal Developing Battlestar Galactica Movie - Film Junk

    www.filmjunk.com/2009/02/22/universal-developing-battlestar...

    Alright I know what youre thinking the final episodes of Battlestar Galactica are about to air on the Sci Fi Channel, and theyre already preparing to spin it ...


  • Home Institute for Writing and Rhetoric

    dartmouth.edu/writing-speech

    RWIT. RWIT is a free service dedicated to helping members of the Dartmouth community develop more effective strategies for generating and organizing their ideas ...


  • How To Develop A Super Memory (Exams) - Videojug - Get Good

    www.videojug.com School Life & Education ExamsRating: 4.3/5 146 ratings

    Video : Tony Buzan is a leading expert on the brain and learning, and was founder of the World Memory Championships. In this film he talks about overcoming the common ...


  • Developing c41 Film - YouTube

    www.youtube.com/watch?v=1718csN3I0U

    This is a video tutorial on how to develop C41 color negative film at home. I use a Unicolor kit in this demonstration and some aspects of this video are ...


  • Film Processing Old Film Processing , developing and printing ...

    oldfilmprocessing.com

    At Kodak Express we provide old Film processing, developing, sacn and printing services throughout the UK


  • Film Developing at The Darkroom Develop Film by Mail for $10

    thedarkroom.com

    The Darkroom - Over 35 years of quality film developing. Film processing for 35mm, 120, 110 and more for as low as $10. C-41, E-6 & B&W

0 comments:

Post a Comment