Saturday, October 19, 2019

How to Take Digital Pictures in Black & White With Red Accents

How to Take Digital Pictures in Black & White With Red Accents

Color enhancement in a black-and-white image allows the artist to creatively interpret a scene and draw attention to a particular object or focal point by adding just a hint of color to a monochrome image. Prior to digital image editing, many photographers would apply color to a black-and-white image using colored inks and pencils. Modern editing software provides the means to apply this technique using isolation tools and color-enhancement options.

Instructions

    1

    Set your camera to the black-and-white settings, usually found within the camera's tool-kit menu under special effects. Each camera will differ as to where the setting is located or if the setting exists on the camera. If no black-and-white setting exists, use a photo-editing software program to create a black-and-white image in the computer.

    2

    Take the intended picture and place the red object or accents in a prominent location among the rule of thirds in your composition. The rule of thirds refers to the intersecting lines in the composition where an image is cut into thirds, both vertically and horizontally. The focal point, in this case the red object, should fall on one of these intersecting lines.

    3

    Transfer the image to your computer using a USB connection to the camera or a flash drive that will accommodate your media card from the camera.

    4

    Open the image in a professional photo-editing software program and select the program's isolation tool, usually a lasso or similar icon.

    5

    Hold down the mouse button while tracing over the object to convert to red. Apply the color to this isolated object using the color tool. Depending on your editing program, you may also use the mask tool to convert this isolated object to the desired color of red.

    6

    Flatten the image, using the flatten setting within your editing program, and save the image. When you add special effects to an image, the program automatically creates layers of each step, which make the file size much smaller. Flattening the image will remove the layers, thus lessening the size of the file. But once you have flattened, you will not be able to access the previous color-enhancement or editing steps.


How to Take Digital Pictures in Black & White With Red Accents

Color enhancement in a black-and-white image allows the artist to creatively interpret a scene and draw attention to a particular object or focal point by adding just a hint of color to a monochrome image. Prior to digital image editing, many photographers would apply color to a black-and-white image using colored inks and pencils. Modern editing software provides the means to apply this technique using isolation tools and color-enhancement options.

Instructions

    1

    Set your camera to the black-and-white settings, usually found within the camera's tool-kit menu under special effects. Each camera will differ as to where the setting is located or if the setting exists on the camera. If no black-and-white setting exists, use a photo-editing software program to create a black-and-white image in the computer.

    2

    Take the intended picture and place the red object or accents in a prominent location among the rule of thirds in your composition. The rule of thirds refers to the intersecting lines in the composition where an image is cut into thirds, both vertically and horizontally. The focal point, in this case the red object, should fall on one of these intersecting lines.

    3

    Transfer the image to your computer using a USB connection to the camera or a flash drive that will accommodate your media card from the camera.

    4

    Open the image in a professional photo-editing software program and select the program's isolation tool, usually a lasso or similar icon.

    5

    Hold down the mouse button while tracing over the object to convert to red. Apply the color to this isolated object using the color tool. Depending on your editing program, you may also use the mask tool to convert this isolated object to the desired color of red.

    6

    Flatten the image, using the flatten setting within your editing program, and save the image. When you add special effects to an image, the program automatically creates layers of each step, which make the file size much smaller. Flattening the image will remove the layers, thus lessening the size of the file. But once you have flattened, you will not be able to access the previous color-enhancement or editing steps.



  • How to Photograph Fireworks Displays - Digital Photography Tips ...

    digital-photography-school.com/how-to-photograph-fireworks

    Do you want to know how to photograph fireworks? With 4 July just days away I thought Id refresh this article in which I give 10 Fireworks Photography tips to help ...


  • CNN Video - Breaking News Videos from CNN.com

    www.cnn.com/videoJustice Politics U.S World

    If you get CNN at home, you can watch it online and on the go for no additional charge.


  • How to Trigger traffic lights to change from red to green Hacks ...

    mods-n-hacks.wonderhowto.com/how-to/trigger-traffic-lights-change...

    This instructional video shows how change traffic lights from red to green, using science, and without actually having to know anything about magnetic fields or ...


  • Photography - Wikipedia, the free encyclopedia

    en.wikipedia.org/wiki/Photography

    Photography (derived from the Greek photos- for "light" and -graphos for "drawing") is the art, science, and practice of creating durable images by


  • How to take good pictures with the camera you have - Illustrated ...

    www.easyphotography.info/tips-on-how-to-take-good-pictures-using...

    FOCUS!!! and how to minimize the delay between your pressing the button and the camera actually taking the picture From the cheapest point-and-shoots to the most ...


  • Graphics Software - How To Information Page 1 eHow

    www.ehow.com Computers Computer Software

    Using Photoscape to add color to black and white images is something that you can do to give the piece a more modern look. Use Photoscape to add color to black and ...


  • Digital Cameras - How To Information Page 1 eHow

    www.ehow.com Electronics Cameras

    If you notice that your child has developed an interest in your digital camera or in taking pictures, consider purchasing your kid his very own digital camera.


  • How to Make An Inexpensive Light Tent DIY

    www.digital-photography-school.com/how-to-make-a-inexpens

    The following tutorial on constructing an Inexpensive Light Tent was Submitted by Jeffrey Bail over at our Forums. I thought it was well worth highlighting here on ...


  • Photography community, including forums, reviews, and galleries ...

    photo.netBrowse Gallery Gallery Top Photographers Random Gallery Image

    Photo.net is a photography community that includes forums, reviews, and galleries for members and casual viewers.

0 comments:

Post a Comment